Read the Mark: the New TigMate® TIG Welding Glove
Ask a TIG welder what matters most in a glove and you’ll get the same answer: feel. You need to feel the filler rod and keep fine control of the torch, and a heavy glove takes that away. That’s why so many TIG welders have reached for the TigMate®.
Now we’ve reengineered it. New leather makes it stronger and softer, the pattern has been refined for improved comfort and fit, and the cuff is longer. It’s still unlined, so nothing sits between the leather and your hand. And the size range now runs to 2XL and 3XL, for welders with large hands.
And like every Elliotts welding glove, it’s independently certified by Intertek SAI Global to today’s standards.
An icon, reengineered for greater protection, comfort and feel.
What’s in the glove
- New soft Cabretta grain leather, stronger and softer than before
- Unlined, for maximum dexterity and touch sensitivity
- Clute pattern, refined for improved comfort and fit: a one-piece palm with no seam at the base of the fingers
- Extended cuff, 340mm to 370mm, that meets the EN 12477 minimum glove lengths in every size
- Heat-resistant aramid thread
- Sizes SML to 3XL, now including 2XL and 3XL for welders with large hands
Why Cabretta leather?
Cabretta is a fine grain leather from hair sheep, which grow hair instead of wool. Their leather has a tighter, finer grain than ordinary sheepskin, so it’s strong and durable for its thickness while staying soft, supple and breathable.
TIG welding runs low heat with minimal spatter, so the TigMate doesn’t need a lining. The leather does the work: soft enough to feel the rod, tough enough to last.
One TigMate, one part number
The TigMate used to come as two gloves, the TIG11 and the TIG16, with cuff lengths of 280mm and 380mm. We’ve consolidated them into one glove, with lengths set to meet the EN 12477 minimum glove lengths in every size: 340mm (SML, MED, LRG), 350mm (XLG), 360mm (2XL) and 370mm (3XL). One glove now does both.
If you’ve been ordering the TIG16, order the TIG11 in the same size.
Read the Mark: what’s on the TigMate cuff
Every number on a welding glove cuff tells you something about how it performed in testing. Here’s what the TigMate markings mean.
EN 407:2020 · 413244
EN 407 rates protection against heat and flame. The six digits are six separate tests, each scored from 1 to 4, with 4 the top of the scale.
Every property has been tested, to the current edition of the standard, with no X’s. An X means a test wasn’t done or isn’t claimed. Contact heat level 1 suits the low heat load of TIG work. For hot workpieces, use pliers or tongs.
EN 388:2016 · 2141B
EN 388 rates protection against mechanical risks.
Tear resistance is at the top level, which counts in a thin, soft leather glove. The TigMate is built for feel rather than cut protection. If your site sets a cut level for welders, ask us about the TigMate Pro CR.
EN 12477 · Type B
Heat resistance on its own doesn’t make a glove suitable for welding. EN 12477 is the standard written for welders’ gloves. Type A prioritises protection for heavier work such as MIG and stick welding. Type B prioritises dexterity for TIG.
The TigMate is certified to EN 12477:2001+A1:2005, Type B, with Dexterity 5 under AS/NZS 2161.2:2020, the top level. Type B is the welders’ glove type built for TIG, which is the TigMate’s job.
Arc welding · EN 1149-2
EN 12477 has an optional requirement for gloves used in arc welding: no conductive parts, such as metal rivets, through the glove, and electrical resistance above 10⁵ ohms, tested to EN 1149-2.
The TigMate meets it, as does every welding glove in the Elliotts range. No welding glove protects against electric shock from faulty equipment or live work, and resistance drops when a glove is wet, dirty or sweaty.
The Certified Product mark · SMK41830
Anyone can print a pictogram and a row of numbers on a glove. A certification mark and licence number are different. They show that an independent body has reviewed the testing, materials, manufacturing and labelling, and keeps checking. You can look the licence up yourself on Intertek SAI Global’s public register.
The TigMate carries the Intertek SAI Global Certified Product mark, licence SMK41830.
Certified to today’s standards
In January 2011, Elliotts became the first company to have welding gloves certified to Australian standards. This year we moved the heat and flame certification of our welding gloves to EN 407:2020, the current edition, and Elliotts was the first company certified by SAI Global to EN 407:2020.
Every Elliotts welding glove is independently certified, and the relaunched TigMate is no exception. It’s certified by Intertek SAI Global to AS/NZS 2161.2:2020, AS/NZS 2161.3:2020 and EN 12477 Type B, and independently rated to EN 407:2020 and EN 388:2016.
Get the TigMate
The TigMate® TIG welding glove, part number TIG11, is available now in sizes SML to 3XL. Download the product data sheet for the full specification, or talk to your Elliotts representative.